Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
mgl:taskreferencehowtos [2014/11/07 21:58]
justin
mgl:taskreferencehowtos [2015/01/21 23:31] (current)
steeve
Line 196: Line 196:
 You can use a National Instruments card for digital I/O with mgl by doing the following: You can use a National Instruments card for digital I/O with mgl by doing the following:
  
-  -Download [[http://joule.ni.com/nidu/cds/​fn/​p/​sn/​n23:​3478.41.181.5994/lang/​en|NI-DAQmx Base]]. You may need to make a free account with NI.+  -Download [[http://www.ni.com/download/ni-daqmx-base-3.7/4272/en/|NI-DAQmx Base]]. You may need to make a free account with NI.
   -Make sure that the device (NI USB-6501) has up-to-date firmware, by running FWUpdate (included in Ni-DAQmx Base/bin)   -Make sure that the device (NI USB-6501) has up-to-date firmware, by running FWUpdate (included in Ni-DAQmx Base/bin)
   -Restart matlab if you have already run readDigPort (the program has to reinit the driver)   -Restart matlab if you have already run readDigPort (the program has to reinit the driver)