Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
mgl:functionreferencedigio [2014/05/29 02:50]
justin
mgl:functionreferencedigio [2014/05/29 07:14] (current)
justin
Line 20: Line 20:
   -Download [[http://​www.ni.com/​download/​ni-daqmx-base-3.7/​4272/​en/​|NI-DAQmx Base]]. You should use the latest version, as of this writing 3.7.0. You may need to make a free account with NI.   -Download [[http://​www.ni.com/​download/​ni-daqmx-base-3.7/​4272/​en/​|NI-DAQmx Base]]. You should use the latest version, as of this writing 3.7.0. You may need to make a free account with NI.
   -Make sure that the device (e.g. NI USB-6501 or NI USB-6211) has up-to-date firmware, by running FWUpdate (included in Ni-DAQmx Base/bin)   -Make sure that the device (e.g. NI USB-6501 or NI USB-6211) has up-to-date firmware, by running FWUpdate (included in Ni-DAQmx Base/bin)
-  -Restart matlab if you have already run readDigPort (the program has to reinit the driver)+  -Restart matlab if you have already run readDigPort (the program has to reinit the driver). Also, note that it is best to run matlab without the desktop (matlab -nodesktop) so that you can see all the console messages described below.
   -Documentation is installed and should be available from the following location<​code>​   -Documentation is installed and should be available from the following location<​code>​
 file:///​Applications/​National%20Instruments/​NI-DAQmx%20Base/​documentation/​docsource/​daqmxbasecfuncindex.htm file:///​Applications/​National%20Instruments/​NI-DAQmx%20Base/​documentation/​docsource/​daqmxbasecfuncindex.htm